Adapts E4944 bulbs to cannula hubs. Polished finish. Overall length: 22mm, 0.9 inches. More Details >

27 gauge. Angled 45° shaft, 5mm from tip to bend with polished finish. Overall length excluding hub: 19mm, 0.75 inches.More Details >

30 gauge. Angled 45° shaft, 5mm from tip to bend with polished finish. Overall length excluding hub: 19mm, 0.75 inches.More Details >

25 gauge anterior chamber maintenance cannula with 3mm long beveled tip for ease of introduction through the side port incision. Uses 20cm (8 inches) of silicone tubing (N5941 4).More Details >

23 gauge. Beveled sharp rounded point. Polished finish. Overall length excluding hub: 35mm, 1.4 inches.More Details >

25 gauge. Beveled sharp rounded point. Polished finish. Overall length excluding hub: 35mm, 1.4 inches.More Details >

This reusable cannula can be used with either the E4812 Backflush Handpiece or with a syringe for injection into the posterior segment. 23 gauge. Overall length excluding hub: 35mm, 1.4 inches. More Details >

Reusable 25 gauge cannula for use with the E4812 Backflush Handpiece or with a syringe for injection into the posterior segment. Overall length excluding hub: 36mm, 1.4 inches. More Details >

This 25 gauge cannula is beveled up to provide easy insertion and injection of fluid for performing hydrodelineation of the lens nucleus. Overall length excluding hub: 20mm, 0.8 inches.More Details >

Excellent for cortex removal at the 12 o’clock position. Gently curved 25 gauge shaft for ease of manipulation. Silicone tubing is used for connecting to an aspiration line. Overall length excluMore Details >

Left. 22 gauge. Angled 30° shaft 13mm from tip to bend with 2.5mm hook curved tip. Polished finish. Overall length excluding hub: 35mm, 1.4 inches.More Details >

Right. 22 gauge. Angled 30° shaft 13mm from tip to bend with 2.5mm hook curved tip. Polished finish. Overall length excluding hub: 35mm, 1.4 inches.More Details >

Order the E4922 Bishop-Harmon Irrigating Cannula, E4942 Adapter for Irrigators, and the E4944 Silicone Bulb individually. See Irrigating Cannulas section for information on individual components of irMore Details >

19 gauge. Angled 30° shaft 5mm from tip to bend with flattened blunt tip. Polished finish. Overall length excluding hub: 25mm, 1.0 inches.More Details >

19 gauge. Curved 90° flattened beveled tip. Polished finish. Overall length excluding hub: 21mm, 0.8 inches.More Details >

The broad olive tip of this angled cannula is designed to provide a stable surface to flip the cataract in the capsular bag and into the anterior chamber effectively executing the flip technique. OverMore Details >

Made of Teflon. Adapts to cannula hubs. 10mm outer diameter. Overall length: 50mm, 2.0 inches.More Details >

The cannula’s polished, rounded tip safely dissects beneath Tenon’s capsule to just beyond the globe’s equator. 23 gauge cannula with three forward-spraying side ports designed to prMore Details >

The gently curved 23 gauge cannula with 0.4mm aspiration port (E4968) on a stainless steel handle complete with a male taper hub which allows direct connection to aspiration tubing. The cannula is useMore Details >

Gently curved 23 gauge cannula with 0.4mm aspiration port ideal for aspiration of cortex through the side port stab incision. Overall length excluding hub: 21mm, 0.8 inches.More Details >

This 25 gauge bottom port cannula is used while injecting air into deep corneal stroma in DALK surgery. The blunt tip helps avoid deeper perforation into the anterior chamber and the flattened cannulaMore Details >

This 27 gauge bottom port cannula is used while injecting air into deep corneal stroma in DALK surgery. The blunt tip helps avoid deeper perforation into the anterior chamber and the flattened cannulaMore Details >

25 gauge. Angled 45° shaft. Polished finished. Shaft 10mm from tip to bend. Overall length excluding hub: 21mm, 0.8 inches.More Details >

25 gauge. Angled 45° shaft. Polished finished. Shaft 5mm from tip to bend. Overall length excluding hub: 18mm, 0.7 inches.More Details >

25 gauge. Angled 45° shaft. Polished finished. Shaft 7mm from tip to bend. Overall length excluding hub: 19mm, 0.8 inches.More Details >